Home |
Products |
Syclone 1178 |
_____________ |
Tech Articles |
Engine |
Transmission |
Chipping |
Electrical |
Misc |
_____________ |
Links |
JS Mfg. |
TurboTime |
CanadianSyTy |
ChitownSyTy |
SyTyArchives |
SyTyAuthority |
SyTy.org |
SyTy.net |
_____________ |
Tie down Cable
|
This is for holding the motor
while power launching. It reduces the stress on motor mounts and
in some cases reduces 1/4 mile time by 1/10th.
|
1 Go to local Auto store and
buy a tailgate cable and a grade 8 bolt. Or find one at local junk
yard.
2 Jack truck up and remove front driver side wheel. 3 Attach cable to bolt behind alt. 4 Route cable down to frame and drill hole so there is very little slack in line. 5 Move cable out of the way and tap the hole
to accept grade 8 bolt. |